Yesterday I got my new display and digital board back from Alexander at Virtual Music in Vienna. The old display had to be changed to a newer one for two reasons, even though the old one still worked.
First of all, the old one would never fit a 19″ rack since it’s too wide. The new one is 182 mm, so it will fit.
Secondly the old one was very hard to read, especially if you were not straight in front of it. Since the PPG Wave 2.2 is supposed to sit in a rack, sideways visibility is crucial.
As you can see on the pictures it’s not just a matter of swapping the old display for a new one – serious modifications must be made to the so called digital board. The digital board contains the driver for the display and the two keypads. All work was very professionally done by Alexander! I plugged it in and it worked instantly!
The encoder for the contrast was also replaced since the old one was kind of intermittent.
Virtual Music also happens to be the reseller of the newer V8.3 firmware that adds a lot of sysex and fixes bugs. V8.3 was ordered as well as new battery kit. I tried to change the eproms, but the old ones were really stuck and impossible to remove without using brutal force, which I didn’t want to. I will have to install V8.3 when the board is removed from the chassis.
The next step is to order a new 6U 19″ rack chassis.